แบริ่ง | บริษัท พรภิญโญ แบริ่ง แอนด์ ซัพพลาย จำกัด

Biodegradable grease SKF

โดย admin | ม.ค. 13, 2016 | Lubricants

LGGB2

Technical data
Designation		LGGB 2/(pack size)
DIN 51825 code		KPE 2K-40
NLGI consistency class		2
Soap type		Lithium/calcium
Colour		Off white
Base oil type		Synthetic ester
Operating temperature range		–40 to +90 °C (–40 to +195°F)
Dropping point DIN ISO 2176		>170 °C (>340 °F)
Base oil viscosity
40 °C, mm²/s 100 °C, mm²/s		110 13
Penetration DIN ISO 2137
60 strokes, 10^–1 mm 100 000 strokes, 10^–1 mm		265–295 +50 max. (325 max.)
Mechanical stability
Roll stability, 50 hrs at 80 °C, 10^–1 mm		+70 max. (350 max.)
Corrosion protection
Emcor:	– standard ISO 11007	0–0
Water resistance
DIN 51 807/1, 3 hrs at 90 °C		0 max.
Oil separation
DIN 51 817, 7 days at 40 °C, static, %		0,3–3
Lubrication ability
R2F, running test B at 120 °C		Pass at 100 °C (210 °F)*
Rolling bearing grease life
R0F test L₅₀ life at 10 000 r/min., hrs		>300 at 120 °C (250 °F)
EP performance
Wear scar DIN 51350/5, 1 400 N, mm 4–ball test, welding load DIN 51350/4, N		1,8 max. 2 600 min.
* Typical value

โดย admin | ม.ค. 13, 2016 | Lubricants

High load, extreme pressure, wide temperature range grease

Available pack sizes
Packsize	Designation
200 g tube	LGWA 2/0.2
420 ml cartridge	LGWA 2/0.4
1 kg can	LGWA 2/1
5 kg can	LGWA 2/5
18 kg pail	LGWA 2/18
50 kg drum	LGWA 2/50
180 kg drum	LGWA 2/180
LAGD series 60 ml	LAGD 60/WA2
LAGD series 125 ml	LAGD 125/WA2
TLSD series 125 ml	TLSD 125/WA2
TLSD series 125 ml refill	TLSD 250/WA2
TLSD series 250 ml	LGWA 2/SD125
TLSD series 250 ml refill	LGWA 2/SD250
TLMR 101 series 120 ml refill (incl. battery)	LGWA 2/MR 120B
TLMR 201 series 120 ml refill	LGWA 2/MR120
TLMR 101 series 380 ml refill (incl. battery)	LGWA 2/MR 380B
TLMR 201 series 380 ml refill	LGWA 2/MR380

Technical data
Designation		LGWA 2/(pack size)
DIN 51825 code		KP2N-30
NLGI consistency class		2
Soap type		Lithium complex
Colour		Amber
Base oil type		Mineral
Operating temperature range		–30 to +140 °C (–20 to +285 °F)
Dropping point DIN ISO 2176		>250 °C (>480 °F)
Base oil viscosity
40 °C, mm²/s 100 °C, mm²/s		185 15
Penetration DIN ISO 2137
60 strokes, 10–¹ mm 100 000 strokes, 10–¹ mm		265–295 +50 max. (325 max.)
Mechanical stability
Roll stability, 50 hrs at 80 °C, 10–¹ mm V2F test		+50 max. change ‘M’
Corrosion protection
Emcor:	– standard ISO 11007 – water washout test	0–0 0–0*
Water resistance
DIN 51 807/1, 3 hrs at 90 °C		1 max.
Oil separation
DIN 51 817, 7 days at 40 °C, static, %		1–5
Lubrication ability
R2F, running test B at 120 °C		Pass at 100 °C (210 °F)
Copper corrosion
DIN 51 811, 110 °C		2 max.
EP performance
Wear scar DIN 51350/5, 1 400 N, mm 4–ball test, welding load DIN 51350/4, N		1,6 max. 2 600 min.
* Typical value

โดย admin | ม.ค. 13, 2016 | Lubricants

LGEP2

Available pack sizes
Packsize	Designation
420 ml cartridge	LGEP 2/0.4
1 kg can	LGEP 2/1
5 kg can	LGEP 2/5
18 kg pail	LGEP 2/18
50 kg drum	LGEP 2/50
180 kg drum	LGEP 2/180
TLMR 101 series 380 ml refill (incl. battery)	LGEP 2/MR 380B
TLMR 201 series 380 ml refill	LGEP 2/MR380

Technical data
Designation		LGEP 2/(pack size)
DIN 51825 code		KP2G-20
NLGI consistency class		2
Soap type		Lithium
Colour		Light brown
Base oil type		Mineral
Operating temperature range		–20 to +110 °C (–5 to +230 °F)
Dropping point DIN ISO 2176		>180 °C (>355 °F)
Base oil viscosity:
40 °C, mm²/s 100 °C, mm²/s		200 16
Penetration DIN ISO 2137:
60 strokes, 10^–1 mm 100 000 strokes, 10^–1 mm		265–295 +50 max. (325 max.)
Mechanical stability:
Roll stability, 50 hrs at 80 °C, 10^–1 mm V2F test		+50 max. ‘M’
Corrosion protection:
Emcor:	– standard ISO 11007 – water washout test – salt water test (100% seawater)	0–0 0–0 1–1*
Water resistance
DIN 51 807/1, 3 hrs at 90 °C		1 max.
Oil separation
DIN 51 817, 7 days at 40 °C, static, %		2–5
Lubrication ability
R2F, running test B at 120 °C		Pass
Copper corrosion
DIN 51 811, 110 °C		2 max.
EP performance
Wear scar DIN 51350/5, 1 400 N, mm 4–ball test, welding load DIN 51350/4, N		1,4 max 2 800 min.
Fretting corrosion
ASTM D4170 (mg)		5,7*
* Typical value

โดย admin | ม.ค. 13, 2016 | Lubricants

General purpose industrial and automotive NLGI 3 grease

Available pack sizes
Packsize	Designation
420 ml cartridge	LGMT 3.0,4
0.5 kg can	LGMT 3/0.5
1 kg can	LGMT 3/1
5 kg can	LGMT 3/5
18 kg pail	LGMT 3/18
50 kg drum	LGMT 3/50
180 kg drum	LGMT 3/180
TLMR 101 series 380 ml refill (incl. battery)	LGMT 3/MR380B
TLMR 201 series 380 ml refill	LGMT 3/MR380

Technical data
Designation		LGMT 3/(pack size)
DIN 51825 code		K3K-30
NLGI consistency class		3
Soap type		Lithium
Colour		Amber
Base oil type		Mineral
Operating temperature range		–30 to +120 °C (–20 to +250 °F)
Dropping point DIN ISO 2176		>180 °C (>355 °F)
Base oil viscosity
40 °C, mm²/s 100 °C, mm²/s		120–130 12
Penetration DIN ISO 2137
60 strokes, 10^–1 mm 100 000 strokes, 10^–1 mm		220–250 280 max.
Mechanical stability
Roll stability, 50 hrs at 80 °C, 10^–1 mm V2F test		295 max. ‘M’
Corrosion protection
Emcor:	– standard ISO 11007 – water washout test	0–0 0–0
Water resistance
DIN 51 807/1, 3 hrs at 90 °C		2 max.
Oil separation
DIN 51 817, 7 days at 40 °C, static, %		1–3
Lubrication ability
R2F, running test B at 120 °C		Pass
Copper corrosion
DIN 51 811, 110 °C		2 max. at 130 °C (265 °F)
Rolling bearing grease life
R0F test L₅₀ life at 10 000 r/min., hrs		1 000 min. at 130 °C (265 °F)

โดย admin | ม.ค. 12, 2016 | Lubrication solutions

LGMT2

Technical data
Designation		LGMT 2/(pack size)
DIN 51825 code		K2K-30
NLGI consistency class		2
Soap type		Lithium
Colour		Red brown
Base oil type		Mineral
Operating temperature range		–30 to +120 °C (–20 to +250 °F)
Dropping point DIN ISO 2176		>180 °C (>355 °F)
Base oil viscosity
40 °C, mm²/s 100 °C, mm²/s		110 11
Penetration DIN ISO 2137:
60 strokes, 10–¹ mm 100 000 strokes, 10–¹ mm		265–295 +50 max. (325 max.)
Mechanical stability
Roll stability, 50 hrs at 80 °C, 10–¹ mm V2F test		+50 max. ‘M’
Corrosion protection
Emcor:	– standard ISO 11007 – water washout test – salt water test (100% seawater)	0–0 0–0 0–1*
Water resistance
DIN 51 807/1, 3 hrs at 90 °C		1 max.
Oil separation
DIN 51 817, 7 days at 40 °C, static, %		1–6
Lubrication ability
R2F, running test B at 120 °C		Pass
Copper corrosion
DIN 51 811, 110 °C		2 max. at 110 °C (230 °F)
* Typical value