| Available pack sizes | |
| Packsize | Designation |
| 420 ml cartridge | LGEP 2/0.4 |
| 1 kg can | LGEP 2/1 |
| 5 kg can | LGEP 2/5 |
| 18 kg pail | LGEP 2/18 |
| 50 kg drum | LGEP 2/50 |
| 180 kg drum | LGEP 2/180 |
| TLMR 101 series 380 ml refill (incl. battery) | LGEP 2/MR 380B |
| TLMR 201 series 380 ml refill | LGEP 2/MR380 |
| Technical data | ||
| Designation | LGEP 2/(pack size) | |
| DIN 51825 code | KP2G-20 | |
| NLGI consistency class | 2 | |
| Soap type | Lithium | |
| Colour | Light brown | |
| Base oil type | Mineral | |
| Operating temperature range | –20 to +110 °C (–5 to +230 °F) |
|
| Dropping point DIN ISO 2176 | >180 °C (>355 °F) | |
| Base oil viscosity: | ||
| 40 °C, mm²/s 100 °C, mm²/s |
200 16 |
|
| Penetration DIN ISO 2137: | ||
| 60 strokes, 10–1 mm 100 000 strokes, 10–1 mm |
265–295 +50 max. (325 max.) |
|
| Mechanical stability: | ||
| Roll stability, 50 hrs at 80 °C, 10–1 mm V2F test |
+50 max. ‘M’ |
|
| Corrosion protection: | ||
| Emcor: | – standard ISO 11007 – water washout test – salt water test (100% seawater) |
0–0 0–0 1–1* |
| Water resistance | ||
| DIN 51 807/1, 3 hrs at 90 °C | 1 max. | |
| Oil separation | ||
| DIN 51 817, 7 days at 40 °C, static, % | 2–5 | |
| Lubrication ability | ||
| R2F, running test B at 120 °C | Pass | |
| Copper corrosion | ||
| DIN 51 811, 110 °C | 2 max. | |
| EP performance | ||
| Wear scar DIN 51350/5, 1 400 N, mm 4–ball test, welding load DIN 51350/4, N |
1,4 max 2 800 min. |
|
| Fretting corrosion | ||
| ASTM D4170 (mg) | 5,7* | |
| * Typical value | ||