Supergrip bolts SKF
The same advanced design of OK Couplings has been applied to the coupling bolt. The Supergrip bolts represent a ‘quantum leap’ in improved technology for connecting rotating flange couplings.
[download id=”641″]
The same advanced design of OK Couplings has been applied to the coupling bolt. The Supergrip bolts represent a ‘quantum leap’ in improved technology for connecting rotating flange couplings.
[download id=”641″]
Technical data | |
Designation |
LDTS 1/5 |
Composition | Mineral oils, hydrocarbons, additives, PTFE |
Colour | White |
Operating temperature range | –5 to +60 °C (25 to 140 °F) |
Viscosity at 40 °C (104 °F) | ca. 28 mm²/s |
Pour point | <0 °C |
Density 25 °C (77 °F) | ca. 841 kg/m³ |
Flash point of the preparation | ca. 100 °C (210 °F) |
Flash point after evaporation of the solvent | >170 °C (340 °F) |
NSF registration | H1 (registration no: 139739) |
Available pack size | 5 l can |
Available pack sizes | |
Packsize | Designation |
18 kg pail | LGLS 0/18 |
180 kg drum | LGLS 0/180 |
Technical data | |
Designation | LGLS 0/(pack size) |
DIN 51825 code | KP0G-40 |
NLGI consistency class | 0 |
Soap type | Anhydrous calcium |
Colour | Red |
Base oil type | Mineral oil & polymers |
Operating temperature range | –40 to +100 °C (–40 to +212 °F) |
Dropping point DIN ISO 2176, °C | > 120 |
Base oil viscosity 40 °C, mm2/s 100 °C, mm2/s |
1 370 96 |
Worked penetration DIN ISO 2137 60 strokes, 10–1 mm |
355-385 |
Corrosion protection SKF Emcor standard ISO 11007 Water wash-out test, ISO 11009 |
0-0 <10% |
Water resistance DIN 51 807/1, 3hrs at 90 °C |
0 |
Lubrication ability SKF R2F B at 90 °C |
pass |
Flow pressure at –40 °C | <1 400 mbar |
EP performances 4-ball test, welding load DIN 51350/4 |
3 200 N |
Available pack sizes | |
Packsize | Designation |
35 g tube | LMCG 1/0.035 |
420 ml cartridge | LMCG 1/0.4 |
2 kg can | LMCG 1/2 |
18 kg pail | LMCG 1/18 |
50 kg drum | LMCG 1/50 |
Technical data | |
Designation | LMCG 1/(pack size) |
DIN 51825 code | GOG1G-0 |
NLGI consistency class | 1 |
Soap type | Polyethylene |
Colour | Brown |
Base oil type | Mineral |
Operating temperature range | 0 to 120 °C (32 to 248 °F) |
Dropping point DIN ISO 2176 | 210 °C (410 °F) |
Base oil viscosity 40 °C, mm²/s 100 °C, mm²/s |
670 34 |
Penetration DIN ISO 2137 60 strokes, 10–1 mm |
310–340 |
Corrosion protection SKF Emcor: – standard ISO 11007 – salt water test (100% seawater) |
0–0 2–2 |
Copper corrosion ASTM D4048 24 hrs at 100 °C |
1b |
EP performance Wear scar DIN 51350/5, 1 400 N, mm 4–ball test, welding load DIN 51350/4, N |
0,5 max. 3 200* |
Koppers Method ASTM D4425 K36, 24h |
<24% |
Approximate density at 20 °C, IPPM-CS/03 |
0.94 |
* Typical value |