Magnetic bearings / Permanent Magnet electric motors SKF
SKF S2M Magnetic Bearings leverage more than 35 years of leadership in active magnetic bearing technology.
SKF S2M Magnetic Bearings leverage more than 35 years of leadership in active magnetic bearing technology.
LHMT 68
Technical data | |
---|---|
Designation | LHMT 68 |
Description | Medium temperature oil |
Specific gravity | 0.85 |
Colour | Yellowish brown |
Base oil type | Mineral |
Operating temperature range | –15 to +90 °C (5 to 195 °F) |
Base oil viscosity: 40 °C (104 °F), mm²/s 100 °C (212 °F), mm²/s |
ISO VG 68 approx. 9 |
Flash point | >200 °C (390 °F) |
Pour point | ≤15 °C (5 °F) |
Available pack sizes: | |
Can 5 liter | LHMT 68/5 |
SKF SYSTEM 24 LAGD series Unit 60 ml Unit 125 ml |
LAGD 60/HMT68* LAGD 125/HMT68* |
SKF SYSTEM 24 TLSD series Complete unit 125 ml Complete unit 250 ml Refill set 125 ml Refill set 250 ml |
TLSD 125/HMT68 TLSD 250/HMT68 LHMT 68/SD125 LHMT 68/SD250 |
LHHT 265
Technical data | |
Designation |
LHHT 265 |
Description | High temperature oil |
Specific gravity | 0.91 |
Colour | Yellow orange |
Base oil type | Synthetic ester |
Operating temperature range | Up to 250 °C (480 °F) |
Base oil viscosity: 40 °C (104 °F), mm²/s 100 °C (212 °F), mm²/s |
approx. 265 approx. 30 |
Flash point | approx. 260 °C (500 °F) |
Pour point | n/a |
Available pack sizes: | |
Can 5 liter | LHHT 265/5 |
SKF SYSTEM 24 LAGD series Unit 60 ml Unit 125 ml |
– LAGD 125/HHT26* |
SKF SYSTEM 24 TLSD series Complete unit 125 ml Complete unit 250 ml Refill set 125 ml Refill set 250 ml |
TLSD 125/HHT26 TLSD 250/HHT26 LHHT 265/SD125 LHHT 265/SD250 |
Technical data | |
Designation |
LDTS 1/5 |
Composition | Mineral oils, hydrocarbons, additives, PTFE |
Colour | White |
Operating temperature range | –5 to +60 °C (25 to 140 °F) |
Viscosity at 40 °C (104 °F) | ca. 28 mm²/s |
Pour point | <0 °C |
Density 25 °C (77 °F) | ca. 841 kg/m³ |
Flash point of the preparation | ca. 100 °C (210 °F) |
Flash point after evaporation of the solvent | >170 °C (340 °F) |
NSF registration | H1 (registration no: 139739) |
Available pack size | 5 l can |
Available pack sizes | |
Packsize | Designation |
420 ml cartridge | LGHP 2/0.4 |
1 kg can | LGHP 2/1 |
5 kg can | LGHP 2/5 |
18 kg pail | LGHP 2/18 |
50 kg drum | LGHP 2/50 |
180 kg drum | LGHP 2/180 |
LAGD series 60 ml | LAGD 60/HP2 |
LAGD series 125 ml | LAGD 125/HP2 |
TLSD series 125 ml | TLSD 125/HP2 |
TLSD series 125 ml refill | TLSD 250/HP2 |
TLSD series 250 ml | LGHP 2/SD125 |
TLSD series 250 ml refill | LGHP 2/SD250 |
TLMR 101 series 380 ml refill (incl. battery) | LGHP 2/MR 380B |
TLMR 201 series 380 ml refill | LGHP 2/MR380 |
Technical data | ||
Designation | LGHP 2/(pack size) | |
DIN 51825 code | K2N-40 | |
NLGI consistency class | 2–3 | |
Soap type | Di–urea | |
Colour | Blue | |
Base oil type | Mineral | |
Operating temperature range | –40 to +150 °C (–40 to +300 °F) |
|
Dropping point DIN ISO 2176 | >240 °C (>465 °F) | |
Base oil viscosity | ||
40 °C, mm²/s 100 °C, mm²/s |
96 10,5 |
|
Penetration DIN ISO 2137 | ||
60 strokes, 10–1 mm 100 000 strokes, 10–1 mm |
245–275 365 max. |
|
Mechanical stability | ||
Roll stability, 50 hrs at 80 °C, 10–1 mm | 365 max. | |
Corrosion protection | ||
Emcor: | – standard ISO 11007 – water washout test – salt water test (100% seawater) |
0–0 0–0 0–0 |
Water resistance | ||
DIN 51 807/1, 3 hrs at 90 °C | 1 max. | |
Oil separation | ||
DIN 51 817, 7 days at 40 °C, static, % | 1–5 | |
Lubrication ability | ||
R2F, running test B at 120 °C | Pass | |
Copper corrosion | ||
DIN 51 811, 110 °C | 1 max. at 150 °C (300 °F) | |
Rolling bearing grease life | ||
R0F test L50 life at 10 000 r/min., hrs | 1 000 min. at 150 °C (300 °F) | |
Fretting corrosion | ||
ASTM D4170 (mg) | 7* | |
* Typical value |
Available pack sizes | |
Packsize | Designation |
420 ml cartridge | LGHB 2/0.4 |
5 kg can | LGHB 2/5 |
18 kg pail | LGHB 2/18 |
50 kg drum | LGHB 2/50 |
180 kg drum | LGHB 2/180 |
LAGD series 60 ml | LAGD 60/HB2 |
LAGD series 125 ml | LAGD 125/HB2 |
TLSD series 125 ml | TLSD 125/HB2 |
TLSD series 125 ml refill | TLSD 250/HB2 |
TLSD series 250 ml | LGHB 2/SD125 |
TLSD series 250 ml refill | LGHB 2/SD250 |
TLMR 101 series 380 ml refill (incl. battery) | LGHB 2/MR 380B |
TLMR 201 series 380 ml refill | LGHB 2/MR380 |
Technical data | ||
Designation | LGHB 2/(pack size) | |
DIN 51825 code | KP2N-20 | |
NLGI consistency class | 2 | |
Soap type | Complex calcium sulphonate |
|
Colour | Brown | |
Base oil type | Mineral | |
Operating temperature range | –20 to +150 °C (–5 to +300 °F) |
|
Dropping point DIN ISO 2176 | >220 °C (>430 °F) | |
Base oil viscosity | ||
40 °C, mm²/s 100 °C, mm²/s |
400–450 26,5 |
|
Penetration DIN ISO 2137 | ||
60 strokes, 10–1 mm 100 000 strokes, 10–1 mm |
265–295 –20 to +50 (325 max.) |
|
Mechanical stability | ||
Roll stability, 72 hrs at 100 °C, 10–1 mm V2F test |
–20 to +50 change ‘M’ |
|
Corrosion protection | ||
Emcor: | – standard ISO 11007 – water washout test – salt water test (100% seawater) |
0–0 0–0 0–0* |
Water resistance | ||
DIN 51 807/1, 3 hrs at 90 °C | 1 max. | |
Oil separation | ||
DIN 51 817, 7 days at 40 °C, static, % | 1–3 at 60 °C (140 °F) | |
Lubrication ability | ||
R2F, running test B at 120 °C | Pass at 140 °C (285 °F) | |
Copper corrosion | ||
DIN 51 811, 110 °C | 2 max. 150 °C (300 °F) | |
Rolling bearing grease life | ||
R0F test L50 life at 10 000 r/min., hrs | >1 000 at 130 °C (265 °F) | |
EP performance | ||
Wear scar DIN 51350/5, 1 400 N, mm 4–ball test, welding load DIN 51350/4, N |
0,86* 4 000 min. |
|
Fretting corrosion | ||
ASTM D4170 (mg) | 0* | |
* Typical value |