083-991-4415, 087-711-4212 LINE​:@ponpinyo ppy_2010@hotmail.com
เลือกหน้า

Specialty NTN

specialty

Double-row, self-aligning bearings utilize an inner ring with a single spherical raceway. In this configuration, the inner and outer rings can be misaligned relative to each other. The resulting effect is a comparatively large single angle that imposes moment loads upon the balls.

 

Insulated NTN

insulated

TWO OPTIONS TO PREVENT ELECTRICAL

Electrical pitting often occurs in bearings used in electrical equipment, such as motors and power generators, as a result of current leakage. An electrical current present near a bearing can flow to the inside of the bearing, causing sparks that damage the rolling contact surface, ultimately leading to bearing failure. This electrical pitting and can be prevented with coated bearings or ceramic hybrid bearings.

 

Angular Contact NTN

angular-contact

SINGLE ROW ANGULAR CONTACT

Single row angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction.

DOUBLE ROW ANGULAR CONTACT

Double row angular contact ball bearings have an inner and outer ring with a double raceway. The two rows are so related that the contact angle is similar to a pair of back-to-back single row bearings.

[download id=”873″]

 

 

 

 

 

 

 

 

Deep Groove NTN

deep-groove

Deep groove, or single row radial, ball bearings are the most widely used bearings. They utilize an uninterrupted raceway that makes them optimal for radial loads .This design permits precision tolerance, even at high-speed operation.

  • Clean, vacuum-degassed, high-carbon chromium steel that undergoes a proprietary heat treatment to reduce crack sensitivity.
  • High-power density that allows a smaller bearing to support higher loads.
  • Low-weight, compact designs.
  • A wide range of sizes.

[download id=”869″]

 

Ball Bearings NTN

ball-bearings

Our ball bearings are available to you off-the-shelf, in sizes ranging from 10 mm to 320 mm outside diameters. And with a virtually limitless variety of configurations of seals, shields, lubricants, internal clearances, and cage designs, there’s no reason to go anywhere else for your ball bearing needs.