083-991-4415 LINE​:@ponpinyo ppy_2010@hotmail.com

Low temperature, extremely high speed grease SKF

Low temperature, extremely high speed grease

Available pack sizes
Packsize Designation
180 g tube LGLT 2/0.2
0,9 kg can LGLT 2/1
25 kg pail LGLT 2/25
170 kg drum LGLT 2/180
Technical data
Designation LGLT 2/(pack size)
DIN 51825 code K2G-50
NLGI consistency class 2
Soap type Lithium
Colour Beige
Base oil type Synthetic (PAO)
Operating temperature range –50 to +110 °C
(–60 to +230 °F)
Dropping point DIN ISO 2176 >180 °C (>355 °F)
Base oil viscosity
40 °C, mm²/s
100 °C, mm²/s
18
4,5
Penetration DIN ISO 2137
60 strokes, 10–1 mm
100 000 strokes, 10–1 mm
265–295
+50 max.
Mechanical stability
Roll stability, 50 hrs at 80 °C, 10–1 mm 380 max.
Corrosion protection
Emcor: – standard ISO 11007 0–1
Water resistance
DIN 51 807/1, 3 hrs at 90 °C 1 max.
Oil separation
DIN 51 817, 7 days at 40 °C, static, % <4
Copper corrosion
DIN 51 811, 110 °C 1 max. 100 °C (210 °F)
Rolling bearing grease life
R0F test L50 life at 10 000 r/min., hrs >1 000,
20 000 r/min. at 100 °C (210 °F)
EP performance
4–ball test, welding load DIN 51350/4, N 2 000 min.

Y-bearings (insert bearings) SKF

Y-bearing-3D-rendering

Y-bearings, which are usually referred to as insert bearings, are based on sealed deep groove ball bearings in the 62 and 63 series, but have a convex outer ring and in most cases an extended inner ring with a certain locking device enabling quick and easy mounting onto the shaft.

Product features

  • Designed for quick, easy and safe mounting
  • Sealed, greased and ready to mount
  • Multiple sealing solutions available
  • Virtually maintenance-free variants available
  • Available in different designs, materials and sizes
  • Standard and food grade greases available
  • In accordance with ISO

Y-bearings with grub screws

Y-bearings with grub (set) screws in the inner ring are locked onto the shaft by tightening the two cup point hexagonal grub screws, positioned 120° apart. These bearings are suitable for applications for both constant and alternating direction of rotation.

[download id=”330″]

Y-bearings with an eccentric locking collar

Y-bearings with an eccentric locking collar are intended primarily for use in applications where the direction of rotation is constant. On one side, the extended inner ring of the bearing has an eccentric step. The step accommodates the locking collar.

[download id=”335″]

SKF ConCentra Y-bearings

SKF ConCentra Y-bearings have an inner ring symmetrically extended on both sides. The patented SKF ConCentra locking technology is based on the expansion and contraction of two mating surfaces: the bearing bore and the external surface of the stepped sleeve.

[download id=”337″]

Y-bearings with a tapered bore

Y-bearings with a tapered bore  have an inner ring symmetrically extended on both sides and a tapered bore (taper 1:12) enabling them to be mounted on a standard H 23 series adapter sleeve. Mounting onto an adapter sleeve enables the bearings to run smoothly and the full limiting speed can be achieved, even when using commercial grade shafts.

[download id=”339″]

Y-bearings with a standard inner ring

Y-bearings with a standard inner ring have normal tolerances for the bearing bore diameter and are locked onto the shaft using an appropriate interference fit.

[download id=”341″]

 

Y-bearings (insert bearings) SKF

Y-bearing-3D-rendering

Y-bearings, which are usually referred to as insert bearings, are based on sealed deep groove ball bearings in the 62 and 63 series, but have a convex outer ring and in most cases an extended inner ring with a certain locking device enabling quick and easy mounting onto the shaft.