| Technical data | |
| Designation |
LDTS 1/5 |
| Composition | Mineral oils, hydrocarbons, additives, PTFE |
| Colour | White |
| Operating temperature range | –5 to +60 °C (25 to 140 °F) |
| Viscosity at 40 °C (104 °F) | ca. 28 mm²/s |
| Pour point | <0 °C |
| Density 25 °C (77 °F) | ca. 841 kg/m³ |
| Flash point of the preparation | ca. 100 °C (210 °F) |
| Flash point after evaporation of the solvent | >170 °C (340 °F) |
| NSF registration | H1 (registration no: 139739) |
| Available pack size | 5 l can |
| Available pack sizes | |
| Packsize | Designation |
| 18 kg pail | LGLS 0/18 |
| 180 kg drum | LGLS 0/180 |
| Technical data | |
| Designation | LGLS 0/(pack size) |
| DIN 51825 code | KP0G-40 |
| NLGI consistency class | 0 |
| Soap type | Anhydrous calcium |
| Colour | Red |
| Base oil type | Mineral oil & polymers |
| Operating temperature range | –40 to +100 °C (–40 to +212 °F) |
| Dropping point DIN ISO 2176, °C | > 120 |
| Base oil viscosity 40 °C, mm2/s 100 °C, mm2/s |
1 370 96 |
| Worked penetration DIN ISO 2137 60 strokes, 10–1 mm |
355-385 |
| Corrosion protection SKF Emcor standard ISO 11007 Water wash-out test, ISO 11009 |
0-0 <10% |
| Water resistance DIN 51 807/1, 3hrs at 90 °C |
0 |
| Lubrication ability SKF R2F B at 90 °C |
pass |
| Flow pressure at –40 °C | <1 400 mbar |
| EP performances 4-ball test, welding load DIN 51350/4 |
3 200 N |
| Available pack sizes | |
| Packsize | Designation |
| 35 g tube | LMCG 1/0.035 |
| 420 ml cartridge | LMCG 1/0.4 |
| 2 kg can | LMCG 1/2 |
| 18 kg pail | LMCG 1/18 |
| 50 kg drum | LMCG 1/50 |
| Technical data | |
| Designation | LMCG 1/(pack size) |
| DIN 51825 code | GOG1G-0 |
| NLGI consistency class | 1 |
| Soap type | Polyethylene |
| Colour | Brown |
| Base oil type | Mineral |
| Operating temperature range | 0 to 120 °C (32 to 248 °F) |
| Dropping point DIN ISO 2176 | 210 °C (410 °F) |
| Base oil viscosity 40 °C, mm²/s 100 °C, mm²/s |
670 34 |
| Penetration DIN ISO 2137 60 strokes, 10–1 mm |
310–340 |
| Corrosion protection SKF Emcor: – standard ISO 11007 – salt water test (100% seawater) |
0–0 2–2 |
| Copper corrosion ASTM D4048 24 hrs at 100 °C |
1b |
| EP performance Wear scar DIN 51350/5, 1 400 N, mm 4–ball test, welding load DIN 51350/4, N |
0,5 max. 3 200* |
| Koppers Method ASTM D4425 K36, 24h |
<24% |
| Approximate density at 20 °C, IPPM-CS/03 |
0.94 |
| * Typical value | |
Grease or SKF Energy Efficient (E2) ball bearings
| Available pack sizes | |
| Packsize | Designaton |
| 420 ml cartridge | LEGE 2/0.4 |
| 1 kg can | LEGE 2/1 |
Grease for SKF Energy Efficient (E2) spherical roller bearings
| Available pack sizes | |
| Packsize | Designaton |
| 420 ml cartridge | LESA 2/0.4 |
| 1 kg can | LESA 2/1 |
| 5 kg can | LESA 2/5 |
| 18 kg pail | LESA 2/18 |
| Available pack sizes | |
| Packsize | Designation |
| 50 g syringe | LGET 2/0.050 |
| 1 kg can | LGET 2/1 |
| Technical data | ||
| Designation | LGET 2/(pack size) | |
| DIN 51825 code | KFK2U-40 | |
| NLGI consistency class | 2 | |
| Soap type | PTFE | |
| Colour | Off white | |
| Base oil type | Synthetic (fluorinated polyether) |
|
| Operating temperature range | –40 to +260 °C (–40 to +500 °F) |
|
| Dropping point DIN ISO 2176 | >300 °C (>570 °F) | |
| Base oil viscosity | ||
| 40 °C, mm²/s 100 °C, mm²/s |
400 38 |
|
| Penetration DIN ISO 2137 | ||
| 60 strokes, 10–1 mm | 265–295 | |
| Mechanical stability | ||
| Roll stability, 50 hrs at 80 °C, 10–1mm | ±30 max. 130 °C (265 °F) | |
| Corrosion protection | ||
| Emcor: | – standard ISO 11007 | 1–1 |
| Water resistance | ||
| DIN 51 807/1, 3 hrs at 90 °C | 0 max. | |
| Oil separation | ||
| DIN 51 817, 7 days at 40 °C, static, % | 13 max. 30 hrs at 200 °C (390 °F) | |
| Copper corrosion | ||
| DIN 51 811, 110 °C | 1 | |
| Rolling bearing grease life | ||
| R0F test L50 life at 10 000 r/min., hrs | >700, 5 600 r/min.* at 220 °C (430 °F) | |
| EP performance | ||
| 4–ball test, welding load DIN 51350/4, N | 8 000 min. | |
| * Typical value | ||