สารหล่อลื่นจารบี | บริษัท พรภิญโญ แบริ่ง แอนด์ ซัพพลาย จำกัด

High load, wide temperature grease SKF

โดย admin | ม.ค. 13, 2016 | Lubricants

High load, wide temperature grease

Available pack sizes
Packsize	Designation
420 ml cartridge	LGWM 2/0.4
5 kg can	LGWM 2/5
18 kg pail	LGWM 2/18
50 kg drum	LGWM 2/50
180 kg drum	LGWM 2/180
LAGD series 125 ml	LAGD 125/WM2
TLSD series 125 ml	TLSD 125C/WM2
TLSD series 125 ml refill	TLSD 250C/WM2
TLSD series 250 ml	LGWM 2/SD125C
TLSD series 250 ml refill	LGWM 2/SD250C
TLMR 101 series 380 ml refill (incl. battery)	LGWM 2/MR 380B
TLMR 201 series 380 ml refill	LGWM 2/MR380

Technical data
Designation		LGWM 2/(pack size)
DIN 51825 code		KP2G-40
NLGI consistency class		1–2
Soap type		Complex calcium sulphonate
Colour		Yellow
Base oil type		Synthetic (PAO)/ Mineral
Operating temperature range		–40 to +110 °C (–40 to +230 °F)
Dropping point DIN ISO 2176		>300 °C (>570 °F)
Base oil viscosity
40 °C, mm²/s 100 °C, mm²/s		80 8,6
Penetration DIN ISO 2137
60 strokes, 10^–1 mm 100 000 strokes, 10^–1 mm		280–310 +30 max
Mechanical stability
Roll stability, 50h at 80 °C, 10^–1 mm		+50 max.
Corrosion protection
Emcor:	– standard ISO 11007 – water washout test – salt water test (100% seawater)	0–0 0–0 0–0
Water resistance
DIN 51 807/1, 3 hrs at 90 °C		1 max.
Oil separation
DIN 51 817, 7 days at 40 °C, static, %		3 max.
Lubrication ability
R2F, running test B at 120 °C R2F, Cold chamber test (+20 °C to –30 °C)		Pass at 140 °C (285 °F) Pass
Copper corrosion
DIN 51 811, 110 °C		1 max.
Rolling bearing grease life
R0F test L₅₀ life at 10 000 r/min., hrs		1 824* at 110 °C
EP performance
Wear scar DIN 51350/5, 1 400 N, mm 4–ball test, welding load DIN 51350/4, N		1,5 max. 4 000
Fretting corrosion
ASTM D4170 FAFNIR test at +25 °C, mg ASTM D4170 FAFNIR test at –20 °C, mg		5,2* 1,1*
* Typical value

โดย admin | ม.ค. 13, 2016 | Lubricants

LGWM1

Available pack sizes
Packsize	Designation
420 ml cartridge	LGWM 1/0.4
5 kg can	LGWM 1/5
50 kg drum	LGWM 1/50
180 kg drum	LGWM 1/180
TLMR 101 series 380 ml refill (incl. battery)	LGWM 1/MR 380B
TLMR 201 series 380 ml refill	LGWM 1/MR380

Technical data
Designation		LGWM 1/(pack size)
DIN 51825 code		KP1G-30
NLGI consistency class		1
Soap type		Lithium
Colour		Brown
Base oil type		Mineral
Operating temperature range		–30 to +110 °C (–20 to +230 °F)
Dropping point DIN ISO 2176		>170 °C (>340 °F)
Base oil viscosity
40 °C, mm²/s 100 °C, mm²/s		200 16
Penetration DIN ISO 2137
60 strokes, 10^–1 mm 100 000 strokes, 10^–1 mm		310–340 +50 max.
Corrosion protection:
Emcor:	– standard ISO 11007 – water washout test	0–0 0–0
Water resistance
DIN 51 807/1, 3 hrs at 90 °C		1 max.

Oil separation
DIN 51 817, 7 days at 40 °C, static, %		8–13
Copper corrosion
DIN 51 811, 110 °C		2 max. at 90 °C (>195 °F)
EP performance
Wear scar DIN 51350/5, 1 400 N, mm 4–ball test, welding load DIN 51350/4, N		1,8 max. 3 200 min.*
Fretting corrosion
ASTM D4170 (mg)		5,5*
* Typical value

โดย admin | ม.ค. 13, 2016 | Lubricants

Low temperature, extremely high speed grease

Technical data
Designation		LGLT 2/(pack size)
DIN 51825 code		K2G-50
NLGI consistency class		2
Soap type		Lithium
Colour		Beige
Base oil type		Synthetic (PAO)
Operating temperature range		–50 to +110 °C (–60 to +230 °F)
Dropping point DIN ISO 2176		>180 °C (>355 °F)
Base oil viscosity
40 °C, mm²/s 100 °C, mm²/s		18 4,5
Penetration DIN ISO 2137
60 strokes, 10^–1 mm 100 000 strokes, 10^–1 mm		265–295 +50 max.
Mechanical stability
Roll stability, 50 hrs at 80 °C, 10^–1 mm		380 max.
Corrosion protection
Emcor:	– standard ISO 11007	0–1
Water resistance
DIN 51 807/1, 3 hrs at 90 °C		1 max.
Oil separation
DIN 51 817, 7 days at 40 °C, static, %		<4
Copper corrosion
DIN 51 811, 110 °C		1 max. 100 °C (210 °F)
Rolling bearing grease life
R0F test L₅₀ life at 10 000 r/min., hrs		>1 000, 20 000 r/min. at 100 °C (210 °F)
EP performance
4–ball test, welding load DIN 51350/4, N		2 000 min.

โดย admin | ม.ค. 13, 2016 | Lubricants

LGBB-2

Technical data
Designation		LGBB 2/(pack size)
DIN 51825 code		KP2G-40
NLGI consistency class		2
Soap type		Lithium complex
Colour		Yellow
Base oil type		Synthetic (PAO)
Operating temperature range		–40 to +120 °C (–40 to +250 °F)
Dropping point DIN ISO 2176		>200 (390 °F)
Base oil viscosity
40 °C, mm²/s		68
Penetration DIN ISO 2137
60 strokes, 10^–1 mm 100 000 strokes, 10^–¹ mm		265–295 +50 max.
Mechanical stability
Roll stability, 50h at 80 °C, 10^–1 mm		+50 max.
Corrosion protection
Emcor:	– Standard ISO 11007 – Salt water test (100% sea water)	0–0 0–1*
Water resistance
DIN 51 807/1, 3 hours at 90 °C		1 max.
Oil separation
DIN 51817, 7 days at 40 °C, static, %		4 max, 2.5*
Copper corrosion
DIN 51 811, 120 °C		1 max.
EP performances
Wear scar DIN 51350/5, 1400 N, mm 4-ball test, welding load DIN 51350/4, N		0.4 * 5 500 *
Rolling bearing lubrication ability
Fe8, DIN 51819, 80 kN, 80 °C, C/P 1.8, 500 h		pass
False brinellng resistance
ASTM D4170 FAFNIR test, mg		0–1*
* Typical value

โดย admin | ม.ค. 13, 2016 | Lubricants

LGGB2

Technical data
Designation		LGGB 2/(pack size)
DIN 51825 code		KPE 2K-40
NLGI consistency class		2
Soap type		Lithium/calcium
Colour		Off white
Base oil type		Synthetic ester
Operating temperature range		–40 to +90 °C (–40 to +195°F)
Dropping point DIN ISO 2176		>170 °C (>340 °F)
Base oil viscosity
40 °C, mm²/s 100 °C, mm²/s		110 13
Penetration DIN ISO 2137
60 strokes, 10^–1 mm 100 000 strokes, 10^–1 mm		265–295 +50 max. (325 max.)
Mechanical stability
Roll stability, 50 hrs at 80 °C, 10^–1 mm		+70 max. (350 max.)
Corrosion protection
Emcor:	– standard ISO 11007	0–0
Water resistance
DIN 51 807/1, 3 hrs at 90 °C		0 max.
Oil separation
DIN 51 817, 7 days at 40 °C, static, %		0,3–3
Lubrication ability
R2F, running test B at 120 °C		Pass at 100 °C (210 °F)*
Rolling bearing grease life
R0F test L₅₀ life at 10 000 r/min., hrs		>300 at 120 °C (250 °F)
EP performance
Wear scar DIN 51350/5, 1 400 N, mm 4–ball test, welding load DIN 51350/4, N		1,8 max. 2 600 min.
* Typical value