Roller screws offer a performance level far beyond the capabilities of ball screws. They are well suited for heavy loads, high duty, high rotational speed, high linear speed, high acceleration (especially planetary roller screws), ultimate precision and rigidity, and for operation in harsh environments.
| Technical data | |
|---|---|
| Designation | LUB-200 |
| Description | Biodegradable oil |
| Specific gravity | 0.916 |
| Colour | Blue |
| Base oil type | Synthetic |
| Operating temperature range | 10 to 50 °C |
| Base oil viscosity: 40 °C (104 °F), mm²/s 100 °C (212 °F), mm²/s |
36 mm²/s 8 mm²/s |
| Flash point | 310 °C (NFT 60-118) |
| Pour point | –21 °C (NFT 60105) |
| Available pack sizes: | Can 2, 5 and 60 l |
LHMT 68
| Technical data | |
|---|---|
| Designation | LHMT 68 |
| Description | Medium temperature oil |
| Specific gravity | 0.85 |
| Colour | Yellowish brown |
| Base oil type | Mineral |
| Operating temperature range | –15 to +90 °C (5 to 195 °F) |
| Base oil viscosity: 40 °C (104 °F), mm²/s 100 °C (212 °F), mm²/s |
ISO VG 68 approx. 9 |
| Flash point | >200 °C (390 °F) |
| Pour point | ≤15 °C (5 °F) |
| Available pack sizes: | |
| Can 5 liter | LHMT 68/5 |
| SKF SYSTEM 24 LAGD series Unit 60 ml Unit 125 ml |
LAGD 60/HMT68* LAGD 125/HMT68* |
| SKF SYSTEM 24 TLSD series Complete unit 125 ml Complete unit 250 ml Refill set 125 ml Refill set 250 ml |
TLSD 125/HMT68 TLSD 250/HMT68 LHMT 68/SD125 LHMT 68/SD250 |
LHHT 265
| Technical data | |
| Designation |
LHHT 265 |
| Description | High temperature oil |
| Specific gravity | 0.91 |
| Colour | Yellow orange |
| Base oil type | Synthetic ester |
| Operating temperature range | Up to 250 °C (480 °F) |
| Base oil viscosity: 40 °C (104 °F), mm²/s 100 °C (212 °F), mm²/s |
approx. 265 approx. 30 |
| Flash point | approx. 260 °C (500 °F) |
| Pour point | n/a |
| Available pack sizes: | |
| Can 5 liter | LHHT 265/5 |
| SKF SYSTEM 24 LAGD series Unit 60 ml Unit 125 ml |
– LAGD 125/HHT26* |
| SKF SYSTEM 24 TLSD series Complete unit 125 ml Complete unit 250 ml Refill set 125 ml Refill set 250 ml |
TLSD 125/HHT26 TLSD 250/HHT26 LHHT 265/SD125 LHHT 265/SD250 |
| Technical data | |
| Designation |
LDTS 1/5 |
| Composition | Mineral oils, hydrocarbons, additives, PTFE |
| Colour | White |
| Operating temperature range | –5 to +60 °C (25 to 140 °F) |
| Viscosity at 40 °C (104 °F) | ca. 28 mm²/s |
| Pour point | <0 °C |
| Density 25 °C (77 °F) | ca. 841 kg/m³ |
| Flash point of the preparation | ca. 100 °C (210 °F) |
| Flash point after evaporation of the solvent | >170 °C (340 °F) |
| NSF registration | H1 (registration no: 139739) |
| Available pack size | 5 l can |
| Available pack sizes | |
| Packsize | Designation |
| 18 kg pail | LGLS 0/18 |
| 180 kg drum | LGLS 0/180 |
| Technical data | |
| Designation | LGLS 0/(pack size) |
| DIN 51825 code | KP0G-40 |
| NLGI consistency class | 0 |
| Soap type | Anhydrous calcium |
| Colour | Red |
| Base oil type | Mineral oil & polymers |
| Operating temperature range | –40 to +100 °C (–40 to +212 °F) |
| Dropping point DIN ISO 2176, °C | > 120 |
| Base oil viscosity 40 °C, mm2/s 100 °C, mm2/s |
1 370 96 |
| Worked penetration DIN ISO 2137 60 strokes, 10–1 mm |
355-385 |
| Corrosion protection SKF Emcor standard ISO 11007 Water wash-out test, ISO 11009 |
0-0 <10% |
| Water resistance DIN 51 807/1, 3hrs at 90 °C |
0 |
| Lubrication ability SKF R2F B at 90 °C |
pass |
| Flow pressure at –40 °C | <1 400 mbar |
| EP performances 4-ball test, welding load DIN 51350/4 |
3 200 N |