02-899-5444 LINE​:@ponpinyo ppy_2010@hotmail.com
เลือกหน้า

High load, high temperature, high viscosity grease SKF

LGHB2

Available pack sizes
Packsize Designation
420 ml cartridge LGHB 2/0.4
5 kg can LGHB 2/5
18 kg pail LGHB 2/18
50 kg drum LGHB 2/50
180 kg drum LGHB 2/180
LAGD series 60 ml LAGD 60/HB2
LAGD series 125 ml LAGD 125/HB2
TLSD series 125 ml TLSD 125/HB2
TLSD series 125 ml refill TLSD 250/HB2
TLSD series 250 ml LGHB 2/SD125
TLSD series 250 ml refill LGHB 2/SD250
TLMR 101 series 380 ml refill (incl. battery) LGHB 2/MR 380B
TLMR 201 series 380 ml refill LGHB 2/MR380
Technical data
Designation LGHB 2/(pack size)
DIN 51825 code KP2N-20
NLGI consistency class 2
Soap type Complex calcium
sulphonate
Colour Brown
Base oil type Mineral
Operating temperature range –20 to +150 °C
(–5 to +300 °F)
Dropping point DIN ISO 2176 >220 °C (>430 °F)
Base oil viscosity
40 °C, mm²/s
100 °C, mm²/s
400–450
26,5
Penetration DIN ISO 2137
60 strokes, 10–1 mm
100 000 strokes, 10–1 mm
265–295
–20 to +50 (325 max.)
Mechanical stability
Roll stability, 72 hrs at 100 °C, 10–1 mm
V2F test
–20 to +50 change
‘M’
Corrosion protection
Emcor: – standard ISO 11007
– water washout test
– salt water test  (100% seawater)
0–0
0–0
0–0*
Water resistance
DIN 51 807/1, 3 hrs at 90 °C 1 max.
Oil separation
DIN 51 817, 7 days at 40 °C, static, % 1–3 at 60 °C (140 °F)
Lubrication ability
R2F, running test B at 120 °C Pass at 140 °C (285 °F)
Copper corrosion
DIN 51 811, 110 °C 2 max. 150 °C (300 °F)
Rolling bearing grease life
R0F test L50 life at 10 000 r/min., hrs >1 000 at 130 °C (265 °F)
EP performance
Wear scar DIN 51350/5, 1 400 N, mm
4–ball test, welding load DIN 51350/4, N
0,86*
4 000 min.
Fretting corrosion
ASTM D4170 (mg) 0*
* Typical value

High load, wide temperature grease SKF

High load, wide temperature grease

Available pack sizes
Packsize Designation
420 ml cartridge LGWM 2/0.4
5 kg can LGWM 2/5
18 kg pail LGWM 2/18
50 kg drum LGWM 2/50
180 kg drum LGWM 2/180
LAGD series 125 ml LAGD 125/WM2
TLSD series 125 ml TLSD 125C/WM2
TLSD series 125 ml refill TLSD 250C/WM2
TLSD series 250 ml LGWM 2/SD125C
TLSD series 250 ml refill LGWM 2/SD250C
TLMR 101 series 380 ml refill (incl. battery) LGWM 2/MR 380B
TLMR 201 series 380 ml refill LGWM 2/MR380
Technical data
Designation LGWM 2/(pack size)
DIN 51825 code KP2G-40
NLGI consistency class 1–2
Soap type Complex calcium sulphonate
Colour Yellow
Base oil type Synthetic (PAO)/ Mineral
Operating temperature range –40 to +110 °C
(–40 to +230 °F)
Dropping point DIN ISO 2176 >300 °C (>570 °F)
Base oil viscosity
40 °C, mm²/s
100 °C, mm²/s
80
8,6
Penetration DIN ISO 2137
60 strokes, 10–1 mm
100 000 strokes, 10–1 mm
280–310
+30 max
Mechanical stability
Roll stability, 50h at 80 °C, 10–1 mm +50 max.
Corrosion protection
Emcor: – standard ISO 11007
– water washout test
– salt water test  (100% seawater)
0–0
0–0
0–0
Water resistance
DIN 51 807/1, 3 hrs at 90 °C 1 max.
Oil separation
DIN 51 817, 7 days at 40 °C, static, % 3 max.
Lubrication ability
R2F, running test B at 120 °C
R2F, Cold chamber test (+20 °C to –30 °C)
Pass at 140 °C (285 °F)
Pass
Copper corrosion
DIN 51 811, 110 °C 1 max.
Rolling bearing grease life
R0F test L50 life at 10 000 r/min., hrs 1 824* at 110 °C
EP performance
Wear scar DIN 51350/5, 1 400 N, mm
4–ball test, welding load DIN 51350/4, N
1,5 max.
4 000
Fretting corrosion
ASTM D4170 FAFNIR test at +25 °C, mg
ASTM D4170 FAFNIR test at –20 °C, mg
5,2*
1,1*
* Typical value

High load, extreme pressure, wide temperature range grease SKF

High load, extreme pressure, wide temperature range grease

Available pack sizes
Packsize Designation
200 g tube LGWA 2/0.2
420 ml cartridge LGWA 2/0.4
1 kg can LGWA 2/1
5 kg can LGWA 2/5
18 kg pail LGWA 2/18
50 kg drum LGWA 2/50
180 kg drum LGWA 2/180
LAGD series 60 ml LAGD 60/WA2
LAGD series 125 ml LAGD 125/WA2
TLSD series 125 ml TLSD 125/WA2
TLSD series 125 ml refill TLSD 250/WA2
TLSD series 250 ml LGWA 2/SD125
TLSD series 250 ml refill LGWA 2/SD250
TLMR 101 series 120 ml refill (incl. battery) LGWA 2/MR 120B
TLMR 201 series 120 ml refill LGWA 2/MR120
TLMR 101 series 380 ml refill (incl. battery) LGWA 2/MR 380B
TLMR 201 series 380 ml refill LGWA 2/MR380
Technical data
Designation LGWA 2/(pack size)
DIN 51825 code KP2N-30
NLGI consistency class 2
Soap type Lithium complex
Colour Amber
Base oil type Mineral
Operating temperature range –30 to +140 °C
(–20 to +285 °F)
Dropping point DIN ISO 2176 >250 °C (>480 °F)
Base oil viscosity
40 °C, mm²/s
100 °C, mm²/s
185
15
Penetration DIN ISO 2137
60 strokes, 10–¹ mm
100 000 strokes, 10–¹ mm
265–295
+50 max. (325 max.)
Mechanical stability
Roll stability, 50 hrs at 80 °C, 10–¹ mm
V2F test
+50 max. change
‘M’
Corrosion protection
Emcor: – standard ISO 11007
– water washout test
0–0
0–0*
Water resistance
DIN 51 807/1, 3 hrs at 90 °C 1 max.
Oil separation
DIN 51 817, 7 days at 40 °C, static, % 1–5
Lubrication ability
R2F, running test B at 120 °C Pass at 100 °C (210 °F)
Copper corrosion
DIN 51 811, 110 °C 2 max.
EP performance
Wear scar DIN 51350/5, 1 400 N, mm
4–ball test, welding load DIN 51350/4, N
1,6 max.
2 600 min.
* Typical value

High load, extreme pressure grease SKF

LGEP2

Available pack sizes
Packsize Designation
420 ml cartridge LGEP 2/0.4
1 kg can LGEP 2/1
5 kg can LGEP 2/5
18 kg pail LGEP 2/18
50 kg drum LGEP 2/50
180 kg drum LGEP 2/180
TLMR 101 series 380 ml refill (incl. battery) LGEP 2/MR 380B
TLMR 201 series 380 ml refill LGEP 2/MR380
Technical data
Designation LGEP 2/(pack size)
DIN 51825 code KP2G-20
NLGI consistency class 2
Soap type Lithium
Colour Light brown
Base oil type Mineral
Operating temperature range –20 to +110 °C
(–5 to +230 °F)
Dropping point DIN ISO 2176 >180 °C (>355 °F)
Base oil viscosity:
40 °C, mm²/s
100 °C, mm²/s
200
16
Penetration DIN ISO 2137:
60 strokes, 10–1 mm
100 000 strokes, 10–1 mm
265–295
+50 max. (325 max.)
Mechanical stability:
Roll stability, 50 hrs at 80 °C, 10–1 mm
V2F test
+50 max.
‘M’
Corrosion protection:
Emcor: – standard ISO 11007
– water washout test
– salt water test (100% seawater)
0–0
0–0
1–1*
Water resistance
DIN 51 807/1, 3 hrs at 90 °C 1 max.
Oil separation
DIN 51 817, 7 days at 40 °C, static, % 2–5
Lubrication ability
R2F, running test B at 120 °C Pass
Copper corrosion
DIN 51 811, 110 °C 2 max.
EP performance
Wear scar DIN 51350/5, 1 400 N, mm
4–ball test, welding load DIN 51350/4, N
1,4 max
2 800 min.
Fretting corrosion
ASTM D4170 (mg) 5,7*
* Typical value