02-899-5444 LINE​:@ponpinyo ppy_2010@hotmail.com
เลือกหน้า

Angular contact ball bearings FAG

Angular contact ball bearings

Single row angular contact ball bearings

Single row angular contact ball bearings are self-retaining units with solid inner and outer rings and ball and cage assemblies with polyamide, sheet steel or brass cages.

Double row angular contact ball bearings

Double row angular contact ball bearings are units with solid inner and outer rings and ball and cage assemblies with polyamide, sheet steel or brass cages. They correspond in design to single row angular contact ball bearings in pairs in an O arrangement but give a narrower design than these.

Angular contact ball bearings SKF

SRACBB-with-M-cage

Angular contact ball bearings have raceways in the inner and outer rings that are displaced relative to each other in the direction of the bearing axis. This means that they are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.

Single row angular contact ball bearings

SKF single row angular contact ball bearings can accommodate axial loads in one direction only. A single row bearing is typically adjusted against a second bearing.

[download id=”346″]

Double row angular contact ball bearings

SKF double row angular contact ball bearings correspond in design to two single row angular contact ball bearings arranged back-to-back, but take up less axial space.

[download id=”348″]

Four-point contact ball bearings

Four-point contact ball bearings are radial single row angular contact ball bearings with raceways that are designed to support axial loads in both directions.

[download id=”350″]

Angular Contact Ball Bearings NSK

img_angular_contact

Features

  1. High Quality Steel – Ultra clean steel to extend bearing life by up to 80%.
  2. Advanced Grease Technology – NSK lubricants that can extend grease life and performance.
  3. High Grade Balls – Quiet and smooth operation even at high speed.
  4. Super Finished Raceways – Specially honed to minimise noise and improve lubricant distribution and life.
  5. Contact Angle – Offered in 15, 25, 30 and 40 degree angles.
  6. Cages – Available in a range of Polyamide, steel and brass cage assemblies.