| Available pack sizes | |
| Packsize | Designation |
| 420 ml cartridge | LGHP 2/0.4 |
| 1 kg can | LGHP 2/1 |
| 5 kg can | LGHP 2/5 |
| 18 kg pail | LGHP 2/18 |
| 50 kg drum | LGHP 2/50 |
| 180 kg drum | LGHP 2/180 |
| LAGD series 60 ml | LAGD 60/HP2 |
| LAGD series 125 ml | LAGD 125/HP2 |
| TLSD series 125 ml | TLSD 125/HP2 |
| TLSD series 125 ml refill | TLSD 250/HP2 |
| TLSD series 250 ml | LGHP 2/SD125 |
| TLSD series 250 ml refill | LGHP 2/SD250 |
| TLMR 101 series 380 ml refill (incl. battery) | LGHP 2/MR 380B |
| TLMR 201 series 380 ml refill | LGHP 2/MR380 |
| Technical data | ||
| Designation | LGHP 2/(pack size) | |
| DIN 51825 code | K2N-40 | |
| NLGI consistency class | 2–3 | |
| Soap type | Di–urea | |
| Colour | Blue | |
| Base oil type | Mineral | |
| Operating temperature range | –40 to +150 °C (–40 to +300 °F) |
|
| Dropping point DIN ISO 2176 | >240 °C (>465 °F) | |
| Base oil viscosity | ||
| 40 °C, mm²/s 100 °C, mm²/s |
96 10,5 |
|
| Penetration DIN ISO 2137 | ||
| 60 strokes, 10–1 mm 100 000 strokes, 10–1 mm |
245–275 365 max. |
|
| Mechanical stability | ||
| Roll stability, 50 hrs at 80 °C, 10–1 mm | 365 max. | |
| Corrosion protection | ||
| Emcor: | – standard ISO 11007 – water washout test – salt water test (100% seawater) |
0–0 0–0 0–0 |
| Water resistance | ||
| DIN 51 807/1, 3 hrs at 90 °C | 1 max. | |
| Oil separation | ||
| DIN 51 817, 7 days at 40 °C, static, % | 1–5 | |
| Lubrication ability | ||
| R2F, running test B at 120 °C | Pass | |
| Copper corrosion | ||
| DIN 51 811, 110 °C | 1 max. at 150 °C (300 °F) | |
| Rolling bearing grease life | ||
| R0F test L50 life at 10 000 r/min., hrs | 1 000 min. at 150 °C (300 °F) | |
| Fretting corrosion | ||
| ASTM D4170 (mg) | 7* | |
| * Typical value | ||